AUTOMATIC CABINET BOX EDGE POLISHING MACHINE
CABINET BOX POLISHING MACHINE (TI-AMLCB-8)
| Machine Name | CABINET BOX POLISHING MACHINE |
|---|---|
| Model | TI-AML-CB-8 |
| Power Supply | 50 HP |
| Main Motor | 7.5 HP x 2 Nos, 5 HP x 7 Nos |
| Machine Dimension | L(4600mm) x W(2100mm) x H(2100mm) |
| Operational Approach | PLC with 7 Inch HMI Touch Screen Panel |
| Grinding Consumable | Flap Wheel / Polishing Wheel |
| Motor RPM | 1440/min |
| Wheel Size | 100mm x 300mm |
| Type Movement | CONVEYOR BELT |
| Suitable Part Length | L100mm to 6000mm |
| Suitable Part Width | W100mm to 500mm |
| Wear Compensation System | MECHANICAL |
| Installation | 3 Phase Power Connection Required with Air Connection |
| Output Finishing | Grinding, Matt Finish |
| Compound System | Solid Compound System |
| Wheel Changing Time | 15 Sec |
| Suitable Metal | Stainless Steel, Brass, Copper, Aluminum, MS Iron |
| Warranty | 1 Year Warranty Manufacturing |
Automatic Cabinet Box Edge Polishing Machine (TI-AMLCB-8)
The Automatic Cabinet Box Edge Polishing Machine (TI-AMLCB-8) by Taj India Machinery is a fast, reliable, and fully automatic solution to polish metal cabinet boxes with consistent quality.
This machine polishes the outer surface and edges of metal cabinet boxes automatically, using a conveyor belt system. No manual buffing. No uneven finish. Just consistent, production-ready results — piece after piece.
What Makes the TI-AMLCB-8 Different?
Most small factories still rely on manual polishing, which is slow, inconsistent, and expensive in the long run. The TI-AMLCB-8 solves all three problems:
- It runs automatically on a conveyor belt — no operator needed at every step
- It uses PLC with a 7-inch HMI touch screen — easy to control, easy to adjust
- It handles parts from 100mm up to 6000mm in one machine
- Wheel replacement takes only 15 seconds — almost zero downtime
- Works on Stainless Steel, Brass, Copper, Aluminum, and MS Iron
TI-AMLCB-8 Technical Specifications
| Specification | Details |
|---|---|
| Model Number | TI-AML-CB-8 |
| Total Power Supply | 50 HP |
| Main Motors | 7.5 HP × 2 + 5 HP × 7 |
| Machine Dimensions (L × W × H) | 4600mm × 2100mm × 2100mm |
| Control System | PLC with 7-Inch HMI Touch Screen Panel |
| Polishing Tool | Flap Wheel / Polishing Wheel |
| Motor Speed | 1440 RPM |
| Wheel Size | 100mm × 300mm |
| Movement Type | Conveyor Belt |
| Suitable Part Length | 100mm to 6000mm |
| Suitable Part Width | 100mm to 500mm |
| Wear Compensation | Mechanical |
| Installation Requirements | 3-Phase Power + Air Connection |
| Output Finish | Grinding Finish, Matt Finish |
| Compound System | Solid Compound System |
| Wheel Changing Time | 15 Seconds |
| Compatible Metals | Stainless Steel, Brass, Copper, Aluminum, MS Iron |
| Warranty | 1 Year Manufacturing Warranty |
Key Features and Benefits
Fully Automatic Conveyor Belt Operation
The machine runs on a conveyor belt system. Once the part is placed on the belt, it passes through all polishing heads on its own. This removes the need for manual handling at every stage and allows continuous production without stopping.
PLC with 7-Inch HMI Touch Screen Control
All machine settings — speed, pressure, and timing — are controlled through a simple touch screen panel. Even operators with basic training can run the machine confidently. No complicated manual setup required.
Consistent Finish on Every Part
Because the machine applies the same speed and pressure every time, every piece comes out with the same finish. Whether you are polishing 10 parts or 10,000 parts, the quality stays the same throughout the day.
Handles Large Parts Up to 6000mm
The machine is designed for parts ranging from 100mm to 6000mm in length and 100mm to 500mm in width. This means you can polish everything from small junction boxes to large electrical enclosures on the same machine.
Wheel Change in Just 15 Seconds
When a polishing wheel wears out, replacing it takes only 15 seconds. This means your production line does not have to stop for long. Less downtime means more output per shift.
Mechanical Wear Compensation System
As polishing wheels wear down over time, the machine’s mechanical wear compensation system automatically adjusts the wheel position. This keeps the pressure and finish consistent without any manual correction.
Works on 5 Different Metals
The TI-AMLCB-8 is compatible with:
- Stainless Steel
- Brass
- Copper
- Aluminum
- MS Iron (Mild Steel)
One machine handles your full range of metal products — no need to invest in separate machines for each material.
Who Should Use This Machine?
The TI-AMLCB-8 is ideal for:
- Manufacturers of metal cabinet boxes and electrical enclosures
- Stainless steel kitchenware and storage container factories
- Brass and copper decorative product manufacturers
- Metal fabrication units that need surface finishing as part of production
- Any factory that requires a consistent matt or grinding finish on box-shaped metal parts
Installation Requirements
Before ordering, please note the following requirements:
- 3-phase electrical power connection (50 HP capacity)
- Compressed air connection for pneumatic functions
- Floor space of at least 4600mm × 2100mm
- Flat, load-bearing industrial floor
Our technical team will guide you through the installation process step by step. Contact us before setup for a smooth installation experience.
Why Buy From Taj India Machinery?
Taj India Machinery has been manufacturing industrial polishing and grinding machines since 2000. Founded in New Delhi by Mr. Mohd Tasleem, the company has grown from a small workshop into a trusted manufacturer with three production plants and an ISO 9001:2015 certification.
With over 25 years of experience and 80 to 90 types of machines in production, Taj India Machinery serves customers across India and exports globally.
When you buy from Taj India Machinery, you get:
- A machine backed by 25+ years of manufacturing experience
- ISO 9001:2015 certified quality
- 1-year manufacturing warranty
- After-sales service and technical support
- Machines designed specifically for Indian and global industrial requirements
Frequently Asked Questions
Q1. What metals can the TI-AMLCB-8 cabinet box polishing machine work on?
The TI-AMLCB-8 works on Stainless Steel, Brass, Copper, Aluminum, and MS Iron. It is suitable for all common industrial and decorative metals used in cabinet box manufacturing.
Q2. What is the maximum part size this machine can handle?
The machine can handle parts up to 6000mm in length and 500mm in width. The minimum size is 100mm × 100mm.
Q3. How is the TI-AMLCB-8 controlled?
The machine uses a PLC (Programmable Logic Controller) with a 7-inch HMI touch screen panel. Operators can control and monitor all settings from this screen without any manual mechanical adjustments.
Q4. How long does it take to change the polishing wheel?
The polishing wheel can be changed in just 15 seconds, keeping production downtime to a minimum.
Q5. What type of finish does this machine produce?
The TI-AMLCB-8 produces a Grinding Finish and Matt Finish using Flap Wheels or Polishing Wheels.
Q6. What power supply does this machine need?
The machine requires a 3-phase power connection with a total power capacity of 50 HP, along with a compressed air connection.
Q7. What is the warranty on the TI-AMLCB-8?
Taj India Machinery offers a 1-year manufacturing warranty on the TI-AMLCB-8.
Q8. Does Taj India Machinery export this machine outside India?
Yes. Taj India Machinery exports machines to customers worldwide. Contact the sales team for export pricing, shipping, and delivery details.